I wanted to create a guitar but knew I did not have the capabilities essential to do it from scratch. That is when I turned to electric guitar kits. I found it significantly a lot easier than anticipated and even additional rewarding.
A guitar kit is a build it yourself building project that at the finish of you have a totally functioning qualified high-quality guitar. All the things you will need comes in the box and is prepared to be utilised. Everything is created to make it as straightforward as probable, even the holes and cavities are pre-drilled and there are no specialist tools needed, you need to currently have all the required tools and if not a buddy or neighbour will. Electric guitar wood drop tops will demand the following – Screwdriver, Coping saw or jigsaw, sandpaper (several grades), a craft knife and a wood file. That is quite considerably it.
You may well be asking the question. Why do we want a saw? Nicely most electric guitar kits come with a blank headstock to allow you to design and style your own shape and additional emphasise that this is your guitar. The kit I brought had a headstock with 3 tuners on each and every side (holes pre-drilled). So to make positive my design was symmetrical, I located the vertical middle of the headstock and using a piece of paper drew just one particular half on the shape I wanted, traced it onto the headstock then merely flipped it more than and traced it on the other half. Cut it with the saw and then finessed it with sandpaper till it was fantastic and smooth.
There have been a couple of factors a was worried about prior to I even brought the kit. The 1st was the paint job. The physique comes sanded and natural wood so the finish is up to you. Even although the physique was sanded and sealed in the factory I located on my kit it was not a brilliant job so I chose to re-sand the physique beginning with a course paper and moving on to a fine wet & dry paper to really get a smooth experienced look. I choose a navy blue colour to finish my guitar and I utilized an aerosol spray paint that I brought from my local car spares store. It took Four coats till I was delighted with it, and then I gave it a additional two coats of clear to give it a shine and defend the paint. I kept the headstock natural so just sprayed it with the clear to guard the wood. I could then attach the neck and body together which was simply a metal plate and four screws.
The most significant worry for me when I believed about building an electric guitar kit was the electrics. I was not confident about wiring the pickups, switches and knobs, so guess what, I didn’t. The kit I had brought came with these all pre-wired I just basically feed them through the cavities in the guitar body and the job was done.
I plugged into my amp and was actually amazed to be playing one thing I had produced and it sounded excellent. It genuinely encouraged me to play additional typically and to get superior. I will undoubtedly be undertaking an electric guitar kits project once more and genuinely encourage you to do the exact same.
Chris is an avid guitar player who was so shocked by how straightforward and rewarding placing my own guitar together was. It actually is a good way to get a guitar that is definitely yours. please use the links below to obtain far more info on developing electric guitar kits